Dating gibson t top pickups
Dating gibson t top pickups - louisiana adult dating site
However, there were several side effects of this process that would take the humbucker, and music, into all-new territory.Firstly, the effect of a second coil made the pickup much more powerful than a single-coil design.
Call 2 or email me at [email protected], so you’ve set the truss rod for the way you like the neck and the action and intonation are good.I guess most “gearheads” and “tonefreaks” are already very used to boutique pickups.It seems that most variations and options offered out there are reproductions of the sought after “Patent Applied For” pickups (PAFs), which are very special in their own right, but also very elusive.All coils are wound with unique custom wire in both copper and insulation thicknesses to truly capture the originals with no detail spared.Each steel part, and the magnets themselves, have been lab analyzed and recreated, sonically compared and revised to recapture not just the specs of the originals, but the true range of voicings and feel of the originals.The problem with these was that they were plagued by hum and noise. Two coils of wire were used, but put out of phase with each other such that the hum was effectively cancelled out.
The PAF was much quieter than the typical single coil.
You raised or lowered the stop tail into the sweet spot or maybe you came to the conclusion that there really isn’t a sweet spot and that’s fine.
There’s no buzzing, so the frets and the nut are good, so you’re done right?
First place winner of the 2013 Canadian PAF Shootout, the PAF-1 Set represents the fat, bold and woody side of the PAF range. Thick and vocal sounding with an extremely harmonically rich and broad midrange, still with the breathy clarity in the very top end of the treble that Re Wind has become well know for.
These pickups are exact replicas of two different 1959 PAFs, both being rather hot examples. Every single turn of all four coils has been painstakingly captured and recreated on a highly precise CNC coil winder setup to lay the wire down with the exact same pattern as the original coils the entire way through.
I know PAF replicas are probably the pickups everyone go to when it comes to handwound pickups.